Using one large wheel as the active wheel to drive the scooter, it can perform "dynamic test", "long-distance walking test", and "static load test". Color 7-inch microcomputer touch screen control. Usage: Used for road durability fatigue performance of scooters and scooters, as well as wheel wear testing of roller skates.
This testing machine is based on ASTM F2264-14, EN13843:2003, EN 13613:2001, EN 14619; The 2004 standard requires customized testing time and speed, which is a well-designed and easy to operate testing machine. This testing machine is based on EN 13843:2003, EN 13613:2001, and EN 14619; The 2004 standard requires customization, with preset testing time and speed. It is a well-designed and easy to operate testing machine. After the test is completed, all power switches should be turned off to keep the machine and steel balls clean. If necessary, relevant components should be lubricated and maintained monthly.
1. Long distance testing
2. Dynamic testing, i.e. obstacle testing;
Scooters and scooters can be tested.
EN 14619:2004 (E), GB/T 20096-2006 (5.14), CNS6263-11, etc.
1. Conduct a scooter road fatigue test
2. Obstacles: Steel, trapezoidal installation, size according to standards
3. Adding cutting weights: Scooter durability kit
4. PLC automatic control, touch screen observes all test data; Accurately record and test the running time and cumulative number of times in real-time; Adopting touch screen control, all operations can be intuitively operated on the touch screen. The use of dedicated control software can achieve fully automatic control, automatic measurement, and other functions of multi-channel closed-loop control to complete the experiment.
5. The detection frequency can be set, and the equipment will automatically shut down and give an alarm prompt after the detection is completed
6. Equipped with stop/power off memory and breakpoint detection shutdown function; After a sudden power outage, if you call again, the device can automatically save data and run on the battery according to the parameters set before the power outage, without the need for manual startup to set parameters.
7. Shutdown mode: Upon reaching the number of test cycles, the machine will automatically shut down and sound an alarm if the equipment is damaged or deformed excessively.
8. The equipment has a fault self diagnosis system, which automatically diagnoses and displays fault codes when faults occur, facilitating inspection and troubleshooting.
9. Equipped with various testing fixtures required.
1. Drum diameter: 700mm
2. Drum speed: 0.5m/s ± 5%
3. Load: 20-100KG adjustable
4. Testing time: 1min-99h
5. Control system: Adopting PLC touch screen controller.
6. Test clamping space: 1000 * 300 * 1200MM
7. Measurement accuracy: speed ± 1KM/h, load ± 1kg, time error accuracy of 0
8. Power source: Motor control system
9. Host: 1760 * 920 * 1650mm
10. Weight: Approximately 900KG
